Applications
Request information
Request information for: Applications
H2S in Water
Measuring hydrogen sulfide concentration in a pH-volatile liquid (such as water) is much more difficult than in a medium like natural gas.
Ammonia Emissions Monitoring
Ammonia in the atmosphere results from a number of anthropogenic activities primarily associated with intensive agriculture.
Measuring TBC
Polymerization inhibitors are chemicals which stabilize reactive monomers and prevent spontaneous polymerization. If too little inhibitor is added to a reactive monomer,
Fuel Cell Hydrogen Purity Analysis
Impurities, such as hydrogen sulfide and other sulfur-containing species, have a permanent effect on the efficiency of fuel cells
HF Stack monitoring in Aluminium plants
Emissions from the Aluminium smelting process contains harmful gases for the environment, one of these gases is Hydrogen Fluoride (HF).
Titanium Dioxide Manufacturing
The concentration of Vanadium in TiCl4 in the 0-20ppm range can be measured by the OMA-300.
Combustion Control Processes
Controlling the air: fuel ratio to get the maximum useful heat from a fuel is always desirable from both a fuel efficiency and an environmental viewpoint.
Analyzers in Acetone and Phenol Production
Acetone and phenol are two of the most commonly produced organic chemicals in the world.
Moisture Measurement in Industrial Gas Industry
The industrial gas industry supplies gaseous and cryogenic liquid products to a wide variety of markets,
Measuring MeHQ (Polymerization Inhibitor)
Polymerization inhibitors are chemicals which stabilize reactive monomers and prevent spontaneous polymerization.
Measuring Purity of MEG (monoethylene glycol)
MEG is an important raw material in production of polyester fibers. The quality of the fibers is dependent on the purity level of the MEG precursor.
Measuring Diesel in Jet Fuel
Consider the case of an aircraft carrier, where the jet fuel supplied for aircraft an potentially mix with the diesel supplied or forklifts
HF Fenceline monitoring
The LaserGasTM III HF OP detector can detect very low concentrations of HF gas. The detector’s short response time ensures fast detection of an HF gas leak.
In-situ Ammonia measurement in DeNOx
With the latest Neo laser, you can measure directly in the NH3 process. With fast response time / high reliability, this is an ideal solution for NH3 dosing.
In-situ Ammonia measurement in DeNOx
With the latest Neo laser, you can measure directly in the NH3 process. With fast response time / high reliability, this is an ideal solution for NH3 dosing.