The nCLD 822 M analyzer is the next generation in two-channel high precision nitrogen oxide measurement.
We offer a wide range of transmitters suitable for general purpose as well as for hazardous locations.
All-in-one control panel for the LaserGas™ family Sleek full-color touchscreen 15” with narrow tablet-style bezels
Two analyzers on a single flange Configurable setup with high flexibility Low installation costs, low purge requirements
Xentaur’s Dew Point Meter, Model HDT, is a rugged and unique loop powered dew point meter capable of both gas and liquid hydrocarbon phase measurements.
The well-proven ULTRAMAT 23 gas analyzer extended with an hydrogen sulfide (H2S) sensor
The COSA 9610™ is one of the latest instruments from COSA Xentaur for measuring Wobbe Index, BTU/Heating Value and CARI (Combustion Air Requirement Index).
The Wobbe Index is actually the correct representation of the heating value of natural gas arriving, from the gas line, at the orifice where a burner is located. It is not simply the BTU per cubic foot but rather the BTU per cubic foot divided by the square root of the specific gravity.
The ESS dew point measurement system has a modular design and can be configured to meet almost any dew point analysis requirement using different dew point meters manufactured by COSA Xentaur.
Total mercury emissions monitor in stack flue gases
Process control & process safety in a single analyzer Designed for long OPLs & high ranges Baseline-insensitive
The Cosa 9750 is a fast response Zero Emission calorimeter for the on-line monitoring of Wobbe Index (WI), Combustion Air Requirement Index (CARI) and Heating Value (HV). The COSA 9750 is based on the Residual Oxygen Method (ROM), thus avoiding the use of a flame.
COSA Xentaur introduces one of the first commercially available portable Optical Gas Calorimeters. After extensive development work, this instrument proudes the fastest spot check response in the industry; T90=15 seconds for Natural Gas and LPG.