|
|
|
SiteMap
|
|
|
Home
- dependences
Dependences
- address
address
- exhibition
Exhibitions
- seminar
seminar
- Distributors
Ankersmid Distributors
- Producten1
Our products listed by industry
- Sampling Probes
Sampling start with the sample take off point. If you have a colt spot, your measurements are worthless or your analysers can be damaged
- Tubes
for Sample Probes Series ASP / AST
with G 3/4"-connection thread
- ASP
Gas Sample Probe Series ASP
Version ASP 300, ASP 400, ASP 500 Heated
- AST
Electrically heated sample tube
AST 050, AST 100, AST 150
- ADT
- AET
- ATF
- AAS
Protection Shield for sample filter
- Heated Lines
Heated Line are used to transport the sample to the sampling unit which prepares the gas to be measured.
- regulated
- AHLH200
For higher temperatures
up to 200°C
- AHLH2003-PA
For high temperatures
up to 200°C
Fixed PTFE-tube
(6x1 , 8x1 or 10x1 mm)
- AHLH2505-BR
For ultra-high temperatures
up to 250°C
Stainless steel tube
(6x1, 8x1 or 10x1 mm)
- AHLH2004-PA
For high temperatures
up to 200°C
Interchangeable PTFE-tube
(6x1 , 8x1 or 10x1 mm)
- AHLH2503-BR
For ultra-high temperatures
up to 250°C
Fixed PTFE-tube
(6x1 , 8x1 or 10x1 mm)
- AHLH250x
For ultra-high temperatures
Up to 250°C
- AHLH2504-BR
For ultra-high temperatures
up to 250°C
Interchangeable PTFE-tube
(6x1 , 8x1 or 10x1 mm)
- Self regulating
Self limiting sampling tube
- AHLX2003-PA
For high temperatures
up to 200°C
Fixed PTFE-tube
(6x1, 8x1 or 10x1 mm)
ATEX-APPROVED
- AHLX0xx0-PA
For lower temperatures
30°C - 120°C
Fixed PTFE-tube
(6x1, 8x1 or 10x1 mm)
ATEX-APPROVED
- AHLM0
For lower temperatures
30°C - 120°C
- AHLM0xx1-PA
For lower temperatures
30°C - 120°C
Interchangeable PTFE-tube
(6x1, 8x1 or 10x1 mm)
- AHLM0xx0-PA
For lower temperatures
30°C - 120°C
Fixed PTFE-tube
(6x1, 8x1 or 10x1 mm)
- Temperature controllers
Temperature controllers. Wallmounting, DIN-RAIL or 19 inch versions are available
- ATC
Electronic Temperature Controller
ATC
- Coolers
Our gascoolers reduce the dewpoint to a stable 5 °C. This resuls in a correct and reliable measurement
- APC 4xx
Strong industrial Modular Peltier gas cooler, ambient to 45 ° C 1 or 2 heat exchangers (modular)
- AAC
Gas coolers, which make use of the cooling capacity of the ambient temperature.
- APC
Very strong industrial Peltier gas cooler, which up to 50 ° C ambient temperature to operate properly.
- ACC
1 to 4 channel compressor gas cooler, expandable with built-in filters, flow meters and pumps
- Filters
Various gas / liquid filters
filters can be combined as well
- AUF
Universal filter with several filter elements, materials and enhancements such as moisture and alarm output
- AAM
adsorption filter, catalysis various materials, available with various options such as liquid alarm
- AAF
AAF air Suction.
Available with different filterlementen.
Optionally a protective sleeve to the filter
- AHU
AHU Humidifier , with or without drain at the bottom.
Includes ceramic gasblower
- AWB
AWB Gaswas bottle. Available in different bottles. Optional: balls and drain connection options and alarm
- AFP
Ankersmid aerosols / particulate filter liquid. Extremely fine filter for removing acid droplets / acid mist
- APF
A very small and extremely effective and durable filter.
Available in 0.1 microns and 2 μm
- ALS
Available ot of PVDF or stainless steel.
This filter stores fully closed after fluid decisive.
- Condensate Removal
Automatic condensate traps or condensate collectors out of different materials,.
- ACV
Ankersmid Condensate Vessel
ACV
- ALD
ANKERSMID Automatic Liquid drain
- ACS
ANKERSMID Universal Condensate Separator
- Alarm sensors
These liquid sensors are used in gas sample conditions/systems as security alarm in case of condensate break through.
- Flow meters
Rota meters out of glass or Plexiglas with or without needle valve. Flow alarm
- Pumps
Membrane pumps with rotative or linear motor, out of PTFE, Kynar PVDF or Stainless Steel. Peristaltic pumps
- AMP
Membrane pumps with rotative or linear motor, out of PTFE, Kynar PVDF or Stainless Steel
- ACP
Hose Pump Type SR 25. Due to Its unique design this pump is extremely durable and reliable,
- NOx converter
Fast loop liquid Samplers which collect process samples without emissions to the atmosphere or exposure to the operator
- Connectors, Fittings and Manifolds
Complete range of PVDF , PP , PTFE or Stainless Steel Connectors, fittings and manifolds
- PPF
Stainless Steel pipe fittings
‘PPF’ series
- PFM
Stainless Steel fittings
(metric)
‘PFM’ series
- PRV
Stainless Steel Gouge root valves
‘PRV’ (‘PRGV’) series
- PBV
Stainless Steel Ball-valves
‘PBV’ series
- PNV
Stainless Steel Needle valves
‘PNV’ series
- PCV
Stainless Steel Check Valves
‘PCV’ series
- PFI
Stainless Steel fittings
(inches)
‘PFI’ series
- ACF
PTFE, PVDF, PP, Viton tubing, connectors, nipples, 2-way ball valves - 5-way ballvalves
‘ACF’ series
- PMV
Stainless Steel Mini Valves
‘PMV’ series
- PBB
Stainless Steel Block and Bleed Valves
‘PBB’ series
- AGP
Gas panels
pressure regulators
‘AGP’ series
- PVM
Stainless Steel Manifold valves
‘PVM’ series
- Gas panels and pressure regulators
Here you will find a varierty or pressure regulators for sampling and calibration purposes.
- Modular system
Complete integrated wall mounting system and 19”-compact conditioning units or portable conditioning systems in carrying case
- ADS
The innovative new programmed PLC with touch screen provides a comprehensive desktop with separate pop-up menus
- ASS
Complete gas conditioning system for wall mounting.
- APS
The portable system is suitable for variable, discontinuous and continuous operation.
- AMD
For fast panel construction, we also supply the AMS modular system, where the components quickly and efficiently can be clipped.
- Contact1
View the contact details of a distributor near you!
- Ankersmid Sampling
after 30 years of a good gasconditioning, we have a new a innovated range of sampling !
- News1
Our latest products and representments
|
|
|
|
|