|
|
5. Flow meters
 Ankersmid Flow
Meter
AFM
10X
Application flowmeter uit Acryl kan toegepast
worden voor front- en paneelmontage. The AFM 10X flow meter can be used for acrylic and
front panel assembly. The flow meter regulates the flow
to the analyzers and sample preparation in the institutions of the calibration
gases.
Description The Ankersmid AFM consists of a vertical inside cone
shaped glass tube where the float can move freely. The faster the flow, the higher the
float can be.
The flow with the
built-in needle valve can be set. The glass is between 2 stainless
steel blocks with FPM O rings clamped, which is gas tight and well chemically
inert. The readout of the flow meter is
calibrated.
• Good chemical
resistance
•
Compact
• With
built-precision needle valve Available ranges:
AFM 101 |
0,1-1,2 Nl / min |
AFM 102 |
0,5-2,5 Nl / min |
AFM 103 |
0,5-6 Nl / min |
AFM 104 |
2-14 Nl / min |
AFM 105 |
5-30 Nl / min |
Ankersmid Flow
Meter
 AFM 20X Application flowmeter is geschikt voor
paneelmontage in platen dunnen dan 4 mm The AFM 20X flow meter is suitable for panel mounting
plates in less then 4 mm The flow meter regulates the flow
to the analyzers and sample preparation in the institutions of the calibration
gases.
Description bestaat uit een verticaal, aan de
binnenzijde conus gevormde glazen buis waarin de vlotter zich vrij kan
bewegen.
The Ankersmid AFM consists of a vertical 20X, inside cone shaped glass tube where the
float can move freely. The faster the flow, the higher the
float can be.
The flow with the
built-in needle valve can be set. The glass is between 2 PVDF DN 4 /
6 links through FPM O rings clamped, which is gas tight and highly chemically
inert.
• Highly chemical
resistant
•
Compact
• Optional built
with precision needle valve • With built-in
links DN 4 / 6
Available ranges:
AFM 201 |
0,2-2 Nl / min |
AFM 202 |
0,2-2 Nl / min |
6 articles matched
Ankersmid Sampling/Flow meters
|