heated sample tube ankersmid-sampling.com

Electrically heated sampling probe

Application

Application in extractive sampling systems for cold spots and condensation of the sample to avoid.

Condensation with dust quickly leads to blockage of the gassonde and incorrect displays. This is also by using this approach avoid probe.

An extra filter can be mounted to the probe approach, recommended by dust loads greater than 10 g / m³.

Description

This approach comes in 3 standard probe lengths: 0.5, 1 and 1.5 meters (other lengths on request).

Optional is a 2-way Modbus / RS485 communication protocol that all possible signals of all installed controllers combines Ankersmid.

Series Type AST	AST05x	AST10x		AST15x	AST20x
Temperature sensor	TC Fe-CuNi TC Fe-CuNi	TC Fe-CuNi TC Fe-CuNi		TC Fe-CuNi TC Fe-CuNi	TC Fe-CuNi TC Fe-CuNi
Temperature controller	Microprocessor temperatuur regelaar met alarm (optioneel: RS485 of Modbus) Microprocessor temperature controller with alarm (optional RS485 or Modbus)
Length probe	500mm 500mm	1000mm		1500mm	2000mm
Maximum temperature sampling	500°C 500 ° C	500 ° C		450 ° C	400 ° C
Operating temperature up	200°C 200 ° C	200 ° C		200 ° C	200 ° C
Sample Gas Input:	G3/4"i G3 / 4 "i
Dust Loading	max. 2 g/m3 max 2 g/m3
Probe volume of the tube	200ml/m 200ml / m
Sample pressure max	5 bar g 5 bar g
ambient	-20 °C to +70 °C -20 ° C to 70 ° C
Power supply	230VAC, 500W 115VAC, 500W		230VAC, 800W 115VAC, 800W	1200W 230VAC, 1200W 115VAC, 1200W	1500W 230VAC, 1500W 115VAC, 1500W
Electrical standard	EN 61010, EN60519-1 EN 61010, EN60519-1
Degree of protection	IP54 EN 60529 IP54 EN 60529
Mounting flange	DN65 PN6
Material of parts in contact with the sample	Stainless steel 316 Stainless steel 316

heated sample tube